+49 2242 9483009 info@worldwide-wood.de
Mon–Fri 8.00–18.00
Contact
Larch cladding, a rough-sawn board Larch
Sawn & Round Timber

Larch cladding

rough-sawn or planed | also for board-on-board cladding

Cladding boards in German larch, rough-sawn or planed, also for board-on-board cladding. Available in widths from 100 mm to 160 mm + (wide boards) and in lengths of 3.00, 4.00 and 5.00 m.

  • Timber speciesGerman larch
  • VersionCladding board, also for board-on-board cladding
  • Treatmentuntreated, not impregnated
  • Surfacerough-sawn or planed
  • Moisture contentfreshly sawn or kiln-dried (KD)
  • Lead timeapprox. 2–4 weeks
  • Quantityfrom a pallet to a full lorry load
Request a quote WhatsApp
At a glance

Available sizes and versions

Sizes and versions of Larch cladding
Size (in mm)Length in m 3,00 m4,00 m5,00 m
24 × 100 mm24 × 100 mm available in 3.00 m24 × 100 mm available in 4.00 m24 × 100 mm available in 5.00 m
24 × 120 mm24 × 120 mm available in 3.00 m24 × 120 mm available in 4.00 m24 × 120 mm available in 5.00 m
24 × 140 mm24 × 140 mm available in 3.00 m24 × 140 mm available in 4.00 m24 × 140 mm available in 5.00 m
24 × 160 mm + (wide boards)24 × 160 mm + (wide boards) available in 3.00 m24 × 160 mm + (wide boards) available in 4.00 m24 × 160 mm + (wide boards) available in 5.00 m

Intermediate lengths and further dimensions are possible on request.

In detail

Larch cladding, all the essentials

Product description

Larch cladding consists of cladding boards in larch, supplied rough-sawn or planed depending on the version. The dimensions given suit various types of cladding and lining; further widths and intermediate lengths can be enquired about for a specific project.

With planed stock, the actual finished sizes can differ from the original sawn size. You will find more on this in our guide Sawn size and finished size in sawn timber: what is the difference?

The boards can be used singly or combined into various types of cladding. A board-on-board cladding with base and cover boards of differing widths can be built, for example.

Because of its properties, larch is often used for timber cladding outdoors. The boards are supplied left natural and without chemical impregnation.

The boards are available freshly sawn or kiln-dried (KD). How the drying grades differ is explained in our guide Freshly sawn, air-dried or kiln-dried: what is the difference?

Also common are the terms cladding boards, facade boards and shuttering.

A corresponding version in spruce is under Spruce cladding. Boards with a tongue-and-groove profile are under Larch rough-sawn tongue-and-groove boards. Further boards and profiles are in the Sawn & Round Timber overview.

Areas of use

Larch cladding boards are used among other things for roof and wall boarding, facade cladding, screening and other linings, often in garden and landscape construction. Depending on the version, the boards can also be used for board-on-board cladding, for example.

Which dimension and surface version suits a particular project depends on the construction, the installation situation and the loading. For outdoor applications, correct fitting and design detailing in particular have to be taken into account.

Origin & sustainability

The timber for our larch cladding comes from sustainably managed forests in Germany.

Delivery

Delivery is made through various freight partners. The lead time is as a rule approx. 2 to 4 weeks and can vary according to the dimensions, the order quantity and the delivery location.

Depending on the dimension and order quantity, the larch cladding is supplied bundled or by the pallet. Larger quantities up to complete or several lorry loads can be organised accordingly.

Depending on the scope of delivery and the vehicle used, a forklift or comparable lifting equipment may be needed for unloading. When you enquire, please let us know what unloading facilities are available on site.

Collection at our Hennef address is not possible, as only our offices are located there.

Important notes

  • Larch is a natural product. Differences in colour, knots, grain and resin content can occur.
  • The boards are available freshly sawn or kiln-dried (KD).
  • With rough-sawn stock, surface textures and machining marks typical of sawing can be visible.
  • Timber reacts to changes in the ambient humidity. Changes in size, slight distortion or cracks can occur as a result.
  • With planed stock, the actual finished sizes can be smaller than the original sawn sizes.
  • If there are particular requirements regarding appearance, knots, dimensional accuracy or surface, these should be stated with the enquiry.
  • Intermediate lengths and further dimensions are possible on request.
Technical terms explained:
Rough-sawn (opens in a new window) Planed (opens in a new window) Kiln drying (KD) (opens in a new window) Shrinkage crack (opens in a new window)
From the guides

Related guide articles

Spruce cladding, planed boards in section
Sawn, profiled & structural timber · 6 min

Larch or spruce for cladding: differences in weathering, look and price

Larch or spruce for cladding: colour, natural resistance, surface and price level ...

Read the article
A loft floor laid with rough-sawn tongue-and-groove boards, freshly fitted
Sawn, profiled & structural timber · 6 min

Tongue-and-groove boards or cladding: what is the difference and when do you use which?

Rough-sawn tongue-and-groove boards have a tongue and groove, cladding boards do not. The difference in the profile, the dimensions we stock ...

Read the article
All articles on Sawn, profiled & structural timber

Similar products

All products in Sawn & Round Timber

Still have questions, or would you like to send us an enquiry?

The product, size, quantity and delivery postcode are enough. Your written quote follows promptly, usually within 24 hours.

Leave a message +49 2242 9483009

Rather speak to us directly? We are available Mon–Fri 8.00–18.00. In writing you can reach us through the contact form or by e-mail at info@worldwide-wood.de.

Good to know

Larch cladding, frequently asked questions

What does larch cladding cost?

Timber prices move with quantity, size and delivery location. That is why we calculate at current day rates rather than from outdated price lists. Your written quote follows promptly, usually within 24 hours.

Which sizes and lengths are available?

The size table on this page lists our standard sizes, which are usually available. Simply enquire about the size you want and we will check current availability. Other lengths and sizes are usually possible too and can be requested at any time.

Does larch have to be impregnated?

Our larch cladding is supplied left natural and without chemical impregnation. Whether additional surface protection makes sense depends on the intended purpose, the weathering and the construction.

How long does delivery take?

The lead time is as a rule approx. 2 to 4 weeks and can vary according to the dimensions, the order quantity and the delivery location.

5.019 Google reviews