+49 2242 9483009 info@worldwide-wood.de
Mon–Fri 8.00–18.00
Contact
Larch rhombus battens in three widths Larch
Sawn & Round Timber

Larch rhombus battens

Rhombus profile | planed | left natural

Rhombus battens in German larch, planed and with the characteristic rhombus profile. Available in various cross-sections and in the lengths 3.00 m, 4.00 m and 5.00 m.

  • Timber speciesGerman larch
  • VersionRhombus profile
  • Treatmentuntreated, not impregnated
  • Surfaceplaned
  • Lead timeapprox. 3–4 weeks
  • Quantityfrom a pallet to a full lorry load
Request a quote WhatsApp
At a glance

Available sizes and versions

Sizes and versions of Larch rhombus battens
Dimension in mmLength in m 3,00 m4,00 m5,00 m
20 × 45 mm20 × 45 mm available in 3.00 m20 × 45 mm available in 4.00 m20 × 45 mm available in 5.00 m
20 × 65 mm20 × 65 mm available in 3.00 m20 × 65 mm available in 4.00 m20 × 65 mm available in 5.00 m
27 × 68 mm27 × 68 mm available in 3.00 m27 × 68 mm available in 4.00 m27 × 68 mm available in 5.00 m
27 × 88 mm27 × 88 mm available in 3.00 m27 × 88 mm available in 4.00 m27 × 88 mm available in 5.00 m
61 × 68 mm61 × 68 mm available in 3.00 m61 × 68 mm available in 4.00 m61 × 68 mm available in 5.00 m

Special cuts and other quantities on request.

In detail

Larch rhombus battens, all the essentials

Product description

Larch rhombus battens are made from German larch and machined to a rhombus profile. The planed surface and the bevelled profile shape allow an even, clearly structured design of timber surfaces.

Larch is a resinous softwood and, because of its properties, is often used outdoors. The rhombus battens are supplied left natural and, depending on the arrangement, can be worked with open joints or joints of differing widths.

Also common are the terms rhombus profile, rhombus facade and facade battens.

The same surface without a rhombus profile is produced by cladding boards: Larch cladding in the same timber species, Spruce cladding as the more economical option. Further profiles are in the Sawn & Round Timber overview.

Why planed stock carries a different size from rough-sawn is explained in the article Sawn size and finished size.

Areas of use

Larch rhombus battens are used above all for facade cladding, screening, wall linings and decorative timber surfaces in garden and landscape construction.

The actual version, substructure and joint width depend on the particular project and the intended installation situation.

Origin & sustainability

The timber for our larch rhombus battens comes from sustainably managed forests in Germany.

Delivery

Delivery is made through various freight partners. The lead time is as a rule approx. 3 to 4 weeks and can vary according to the dimensions, the order quantity and the delivery location.

The rhombus battens are supplied bundled or by the pallet. Larger order quantities up to complete or several lorry loads can be organised accordingly.

Depending on the scope of delivery and the vehicle used, a forklift or comparable lifting equipment may be needed for unloading. When you enquire, please let us know what unloading facilities are available on site.

Collection at our Hennef address is not possible, as only our offices are located there.

Important notes

  • Larch is a natural product. Differences in colour, knots, grain and resin content can occur.
  • Through weathering and UV exposure, untreated larch changes colour outdoors over time and can develop a silver-grey patina.
  • Timber reacts to changes in the ambient humidity. Slight changes in size, distortion or cracks can therefore occur.
  • For facades and other weathered applications, the construction, rear ventilation and fixing have to be considered for the specific project.
  • If there are particular requirements regarding appearance, grading or surface quality, these should be stated with the enquiry.
  • Further dimensions and versions are possible on request subject to availability.
Technical terms explained:
Planed (opens in a new window) Greying / silver-grey patina (opens in a new window) Rhombus batten (opens in a new window) Shrinkage crack (opens in a new window)
From the guides

Related guide articles

Freshly planed squared timber emerging from the planer
Sawn, profiled & structural timber · 3 min

Sawn size and finished size in sawn timber: what is the difference?

Sawn size, finished size, rough-sawn or planed: what a size specification for sawn timber refers to ...

Read the article
All articles on Sawn, profiled & structural timber

Similar products

All products in Sawn & Round Timber

Still have questions, or would you like to send us an enquiry?

The product, size, quantity and delivery postcode are enough. Your written quote follows promptly, usually within 24 hours.

Leave a message +49 2242 9483009

Rather speak to us directly? We are available Mon–Fri 8.00–18.00. In writing you can reach us through the contact form or by e-mail at info@worldwide-wood.de.

Good to know

Larch rhombus battens, frequently asked questions

What do larch rhombus battens cost?

Timber prices move with quantity, size and delivery location. That is why we calculate at current day rates rather than from outdated price lists. Your written quote follows promptly, usually within 24 hours.

Which sizes and lengths are available?

The size table on this page lists our standard sizes, which are usually available. Simply enquire about the size you want and we will check current availability. Other lengths and sizes are usually possible too and can be requested at any time.

Does larch have to be impregnated?

Our larch rhombus battens are supplied left natural and without chemical impregnation. Whether additional surface protection makes sense depends on the weathering, the construction and the appearance wanted. For outdoor applications, correct design detailing is particularly important.

How long does delivery take?

The lead time is as a rule approx. 3 to 4 weeks and can vary according to the dimensions, the order quantity and the delivery location.

5.019 Google reviews